12 Inch 14 Inch Adjustable Gap Silicone Two Roll Mill for Rubber Compounding

Technical spec.:

The rollers are made of chilled cast iron with wear-resistant hard surfaces. The two rollers are smooth ones with bored cavities and can be cooled homogeneously. The protective device is provided to protect the main parts from damage due to overload. In case of emergency, the safety rod is pulled down and the rollers will be stopped immediately.

Besides providing a full line equipment, we can also provide you with a full set of technical support

Features:

1. Rollers: the roller adopts chilled cast iron alloy (LTG-H) with 75-80 HS ,after quenching and precision processing with long service life,so the surface is hard and wearable;it is harder than others the commom is 72HS.

2. Emergency Stop Device:The machine is also equipped with emergency stop buttons or emergency pull rod. When an emergency happens, just press the emergency button or pull the pull rod,the machine will stop immediately. It is safe and reliable;

3.Motors: We always use OMRON,SIMENS ect brand electric parts or you can choice the ordinary brand.all the motor is high quality and effiency,save energy,low noise,small vibration.

4. Overload: This open mixing mill has overload protection devices, Machine will be stopped automatically, if overloaded;

5. Gear Box:The transmission system adopts hardened reducer,which has a compact structure with higher transmission efficiency,lower noise and longer service life(ZQ reducer and planetary reducer is optional);

6. Bearing Bush:Double Row Spherical Roller Bearing can save energy by 20-30%(Nylon Bushing and Brass Bush is optional);

7. Structure:The base and frame are welded and treated by annealing for stress relieving;

8. Sealing Device:The seal structure with special design can eliminate the leaking phenomenon of lubricating oil;

9.Cooling system:circulation of steam and tap water can be through rollers to control the temperature

10.Safe Electrical Parts: All electrical connections are safe:short circuit is not possible by any means.

Configurations of rubber mixing mill:

1.Gap Adjustment Mode:Manual or Electrical (by motor)

2.Lubricating Method:Manual or Auto;Grease or Thin oil

3.Emergency stop device:Pull Rod and Emergency button

4.Roller bearings: Nylon Bushing or Copper Sleeve or Spherical Roller Bearing

5.Reducer(gear box) type:ZQ type reducer or hard-teeth(hardened) reducer or planetary reducer.

Technical parameters:

Product Tags:

Silicone Two Roll Mill

      

Adjustable Gap Two Roll Mill

      

Two Roll Mill for Rubber Compounding

      

Version	XK-160	XK-250	XK-300	XK-400	XK-450	XK-560	XK-660
Roll diameter(mm)	160	250	300	400	450	560	660
Working length of rolls(mm)	320	620	750	1000
12 Inch 14 Inch Adjustable Gap Silicone Two Roll Mill for Rubber Compounding Images